6K-195 6K-245 6K-310 Orbital Motor, 6K-490 6K-625 6K-625 6K-800 6K-985 6k-390 Orbit hydraulic motor 

1. Max.pressure is the allowed pressure at the inlet port.

2.A simultaneous maximum RPM and maximum pressure NOT recommended.

3.Maximum pressure or maximum RPM operation:10% of every minute.

4.Recommended fluids: Anti-wear type of hydraulic oil.Viscosity recommended 37-73 cSt. Recommended filtration. ISO18/13.Maximum operating temperature recommended 80°C

5.Special high pressure capacity shaft seal ensures back pressure up to 10Mpa. Recommended preferable back pressure 5Mpa. Case drain line is recommended when back pressure higher than 5 Mpa.The motor life is benefited from a case drain line.

6.It is highly recommended that the motor runs at 30% of rated pressure for at least one hour before application of full load.Be sure the motor is filled with fluid prior to any load applications

The OMT/6000/6K/BM6 series orbit hydraulic motors can perfectly replace the following models:

OMT160,OMT200,OMT250,OMT315,OMT400,OMT500…etc.

6K-195,6K-245,6K-310,6K-390,6K-490,6K-625,6K-800,6K-985…etc.